RRP 11.16 Retard Turn Roller Assembly
(See
PL 11.2 500-Sheet Feeder (2 of
Figure 134 Turn Roller Assembly
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the printer from the 500-Sheet Feeder (RRP 11.1 500-Sheet Feeder
Removal).
2.
Remove the paper tray from the feeder.
3.
Remove the Front Cover (RRP 11.2 Front Cover).
4.
Remove the Left Cover (RRP 11.3 Left Cover).
5.
Remove the 500-Sheet Feed Head Assembly (RRP 11.8 Feed Head Assembly).
6.
Remove the Retard Chute (RRP 11.12 Retard Chute Assembly).
7.
Press the locking tab and remove the Turn Gear from the left end of the shaft.
8.
Remove the E-ring from the right end of the shaft.
9.
Remove both the right and left bearings.
10.Remove the shaft.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
3))
345