RRP 10.9 HCS Rear Cover Interlock Switch
(See
PL 10.2 High Capacity Stacker [HCS] (2 of
Figure 116 HCS Rear Cover Interlock Switch
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the HCS Rear Cover.
2.
Remove the HCS Top Cover (RRP 10.2 HCS Top Cover).
3.
Disconnect P/J525 from the interlock switch.
4.
Release the two locking tabs and remove the switch.
Replacement
Reinstall the components in the reverse order.
326
2))
Phaser 5400 Laser Printer Service Guide