Figure 50 Tray 1 Turn Roller Assembly; Rrp 2.4 Tray 1 Turn Roller Assembly - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RRP 2.4 Tray 1 Turn Roller Assembly

(See PL 4.1 Multi-sheet Bypass Feeder (MBF)

Figure 50 Tray 1 Turn Roller Assembly

Removal
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
2. Remove the MBF Gear Cover (RRP 1.8 MBF Gear Cover).
3. Remove the Turn Roller Clutch (RRP 2.3 MBF Tray 1 Turn Roller Clutch
Assembly).
4. Remove the bearing located behind the Turn Roller Clutch.
5. Remove the E-Ring from the right end of the Turn Roller Assembly.
6. Remove the bearing from the right end of the Turn Roller Assembly Shaft.
7. Remove the Turn Roller Assembly.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
Assembly)
263