RRP 11.19 No Paper Sensor
(See
PL 11.2 500-Sheet Feeder (2 of
Figure 137 No Paper Sensor Cover
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the printer from the 500-Sheet Feeder (RRP 11.1 500-Sheet Feeder
Removal).
2.
Remove the paper tray from the feeder.
3.
Remove the Front Cover (RRP 11.2 Front Cover).
4.
Remove the Left Cover (RRP 11.3 Left Cover).
5.
Remove the 500-Sheet Feed Head Assembly (RRP 11.8 Feed Head Assembly).
6.
Remove the screw that secures the sensor cover and remove the cover.
348
3))
Phaser 5400 Laser Printer Service Guide