RRP 3.6 Tray 1 Left Guide Assembly
(See
PL 3.1 Paper
Figure 68 Tray Left Guide Assembly
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect
it from light.
2.
Remove Tray 1.
3.
Remove the Left Side Cover (RRP 1.1 Left Side Cover).
4.
Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
5.
Remove the Retard Chute Assembly (RRP 3.1 Retard Chute Assembly).
6.
From the left side of the printer, disconnect P/J201 from the Tray 1 Size Sensor.
7.
Remove the six screws that secure the Tray 1 left Guide Assembly to the printer.
Phaser 5400 Laser Printer Service Guide
Feeder)
279