Figure 136 Paper Tray Sensor; Rrp 11.18 Paper Tray Sensor - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RRP 11.18 Paper Tray Sensor

(See PL 11.3 500-Sheet Feeder (3 of

Figure 136 Paper Tray Sensor

Removal
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the printer from the 500-Sheet Feeder (RRP 11.1 500-Sheet Feeder
Removal).
2. Remove the paper tray from the feeder.
3. Remove the Front Cover (RRP 11.2 Front Cover).
4. Remove the Left Cover (RRP 11.3 Left Cover).
5. Remove the 500-Sheet Feed Head Assembly (RRP 11.8 Feed Head Assembly).
6. Remove the Retard Chute (RRP 11.12 Retard Chute Assembly).
7. Remove the Left Tray Guide (RRP 11.13 Left Tray Guide).
8. Disconnect P/J137 from the back of the Tray Sensor.
9. Release the three locking tabs and remove the sensor.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
3))
347