RRP 11.7 Feeder Board
(See
PL 11.2 500-Sheet Feeder (2 of
Figure 124 Feeder Board
Removal
Caution: These components are susceptible to electrostatic
discharge. Observe all ESD procedures to avoid damage.
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the paper tray from the feeder.
2.
Remove the Front Cover (RRP 11.2 Front Cover).
3.
Remove the Left Cover (RRP 11.3 Left Cover)
4.
Disconnect P/J13B, P/J133, P/J138, P/J132, and P/J136 from the Feeder PWB.
5.
Remove the two screws that secure the PWB to the printer frame. Remove the
PWB.
Replacement
Reinstall the components in the reverse order.
334
3))
Phaser 5400 Laser Printer Service Guide