RRP 2.10 Tray 1 Feed Roller
(See
PL 4.1 Multi-sheet Bypass Feeder (MBF)
Figure 60 Tray 1 Feed Roller
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
2.
Turn the MBF upside down.
3.
Release the Tray 1 Feed Solenoid.
4.
Rotate the Feed Rollers up.
5.
Press locking tab that secures the Left Roller Core.
6.
Slide the Left Roller Core to the left.
7.
Slide the Feed Roller to the left and remove.
8.
If replacing the Envelope Feed Rollers, press the locking tabs and remove the two
Envelope Feed Rollers.
Replacement
Reinstall the components in the reverse order.
Note:
The arrows on the side of the Envelope Feed Rollers indicate
the direction of rotation.
Phaser 5400 Laser Printer Service Guide
Assembly)
271