Printing Accuracy; Table 14 Printing Accuracy - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

Unacceptable Media
The following media are unacceptable for use in the printer. Their use may cause high
rates of jamming and other paper-handling problems:
Excessively thick or thin paper
I
Heavily textured paper
I
Paper that has already been printed on (pre-printed Letterhead is allowed)
I
Wrinkled, torn, or bent paper
I
Moist or wet paper
I
Curled paper
I
Paper with an electrostatic charge
I
Glued paper
I
Paper with special coating
I
Paper unable to withstand a temperature of 150° C
I
(302° F)
Thermal paper
I
Carbon paper
I
Paper with paper fasteners, ribbons, staples, tape, etc. attached
I
Label stock with exposed backing sheet
I

Printing Accuracy

Table 14 Printing Accuracy
Item
Registration
Skew
Orthogonality
Linearity
Parallelism
Magnification
Phaser 5400 Laser Printer Service Guide
Lead Edge
Side Edge
In direction of paper travel
At right angle of direction of
paper travel
At 40 degree angle to
direction of paper travel
In direction of paper travel
At right angle to direction of
paper travel
Accuracy Measuring
Conditions
2.0 mm
2.5 mm
2.0 mm At a distance of 245 mm
1.3 mm At a distance of 195 mm
1.0 mm For 390 mm straight line
0.7 mm For 245 mm Straight line
1.5 mm For 347 mm straight line
2.0 mm Over 390 mm straight
lines
100 0.8% At a distance of 390 mm
100 0.5% At a distance of 245 mm
25