RRP 1.2 Right Side Cover
(See
PL 1.1
Covers)
Figure 37 Right Side Cover
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the Rear Cover.
2.
Remove the HCS, if installed (RRP 10.1 1000-Sheet High Capacity
Stacker [HCS]).
3.
Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect
it from light.
Note:
Place paper inside the Print Cartridge cavity to catch any
dropped hardware.
4.
Remove the Left Side Cover (RRP 1.1 Left Side Cover).
5.
Remove the Top Cover Assembly (RRP 1.3 Top Cover Assembly).
6.
Remove the five screws that secure the Right Side Cover to the printer.
7.
Remove the Right Side Cover.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
251