Using Launch Applications After Installing Ccm 2.3; Modifying The Application Launch Command Syntax - Nortel Configuration Manager Configuration

14 Chapter 1 Installing Contivity Configuration Manager 2.3
16

Using Launch Applications after installing CCM 2.3

To use BNR or FPM, you MUST do one of the following workarounds after
installing CCM 2.3.
After you install CCM 2.3, you must choose one of two workarounds for
accessing or launching applications. The two options for launching or
accessing the BNR and FPM applications are:
•
•
The following sections describe each option.

Modifying the application launch command syntax

To launch BNR and FPM from within CCM, you MUST change the
application launch command syntax. Because this option applies on a
per-device basis, Nortel recommends that you do this to the first device in
the CCM navigation tree. After you have changed the command syntax on
the first device, you can use this device to launch the application with no
loss of functionality to the BNR and FPM tools.
To modify the application launch command syntax:
Step
1
2
Copyright © 2006, Nortel Networks
.
Contivity Branch Access 2.2.0 or 2.2.1 (based on your previous
CCM installation version)
The CCM 2.3 upgrade creates only placeholders for the migrated
devices on the CCM navigation tree. Using the CCM Client, reimport
all needed devices on the CCM navigation tree.
Modify the application launch command syntax, or
Create a shortcut to the application on your desktop.
Action
In the CCM navigation tree, select the first CES device, and then
click the Applications tab.
Note: You can repeat this procedure for each CES device if you
wish. However, you can launch the application from the first
device, then use the application for other devices.
Select the application you wish to launch, and click Modify.
Installing Contivity Configuration Manager 2.3
318218-C 01.01 Standard
Release 2.3 March 2006
—End—
ATTENTION
CCM
Nortel Networks Confidential