a. Pull the new memory cassette locking handle in an arc toward the front of
the cassette.
b. Orient the cassette as shown in the illustration in step 4; then, lower the
cassette into place.
c. Using both hands, rotate the locking handle toward the rear of the server,
making sure when you finish that the cassette is fully seated and the locking
handle is all the way down.
Note: When the cassette is fully seated and the handle is all the way down,
two black pins protrude through the blue insert on the handle.
6. Install DIMMs in the memory cassette; you can use the DIMMs from the
previous memory cassette. See "DIMM installation" on page 41 for the DIMM
population order to use.
Note: Use the Configuration/Setup Utility program to enable or disable mirrored
memory mode.
7. If you have other options to install or remove, do so now; otherwise, go to
"Completing the installation" on page 58.
Indicator pins
Chapter 4. Installing options
57