Fan Error
LED
Hot-swap fan 1
Hot-swap fan 2
5. Remove all fans (see "Replacing a hot-swap fan" on page 55).
Microprocessor-tray
levers
6. Remove the microprocessor tray:
a. Lift the microprocessor-tray release latch ( 1 ).
b. Open the microprocessor-tray levers ( 2) ).
Attention:
The microprocessor tray is heavy. Pull the tray part-way out of
the server, reposition your hands to grasp the body of the tray, and then
pull the tray out the rest of the way.
Hot-swap fan 5
Hot-swap fan 6
Hot-swap fan 3
Hot-swap fan 4
Microprocessor-tray
release latch
Chapter 4. Installing options
47