Table of Contents
Advertisement
Note: See Chapter 7, "Parts listing, Types 8861, 8862," on page 139 to determine which components are
replaceable by the customer and which components must be replaced by an IBM field service technician.
Error code/symptom
020-xxx-000 (Failed PCI Interface test)
020-xxx-001 (Failed Hot-Swap Slot 1 PCI
Latch test)
020-xxx-002 (Failed Hot-Swap Slot 2 PCI
Latch test)
020-xxx-003 (Failed Hot-Swap Slot 3 PCI
Latch test)
020-xxx-004 (Failed Hot-Swap Slot 4 PCI
Latch test)
020-xxx-005 (Failed Hot-Swap Slot 5 PCI
Latch test)
020-xxx-006 (Failed Hot-Swap Slot 6 PCI
Latch test)
030-xxx-000 (Failed Internal SCSI
interface test)
030-xxx-00n (Failed SCSI test on PCI slot
n. Check system error log before replacing
a FRU.)
035-002-0nn (ServeRAID interface
timeout)
035-253-0nn (ServeRAID controller 0nn
initialization failure; 0nn = the controller
number)
035-253-s99 (RAID adapter initialization
failure)
035-254-0nn (Setup error - unable to
allocate memory to run test.)
035-255-0nn (Internal Error)
035-260-0nn (System to controller
interface failure)
96
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide
FRU/action
1. PCI switch card assembly
2. I/O board
1. PCI hot-swap latch assembly
2. PCI switch card assembly
1. PCI hot-swap latch assembly
2. PCI switch card assembly
1. PCI hot-swap latch assembly
2. PCI switch card assembly
1. PCI hot-swap latch assembly
2. PCI switch card assembly
1. PCI hot-swap latch assembly
2. PCI switch card assembly
1. PCI hot-swap latch assembly
2. PCI switch card assembly
1. Make sure SCSI is not enabled, rerun test.
2. I/O board.
v Adapter in slot n
1. ServeRAID controller may not be configured properly. Obtain the
basic and extended configuration status bytes and see the
ServeRAID Hardware Maintenance Manual for more information.
2. Cable.
3. SCSI backplane.
4. ServeRAID controller.
1. ServeRAID controller may not be configured properly. Obtain the
basic and extended configuration status bytes and see the
ServeRAID Hardware Maintenance Manual for more information.
2. Cable.
3. SCSI backplane.
4. ServeRAID controller.
1. ServeRAID adapter
2. SCSI cable
v Check system resources.
1. SCSI backplane
2. Cable
1. ServeRAID adapter
2. I/O board
Advertisement
Table of Contents
