v Check the LAN activity LED on the rear of the server. The LAN activity LED is lit
v Make sure that you are using the correct device drivers, which come with the
v Check for operating-system-specific causes for the problem.
v Make sure that the device drivers on the client and server are using the same
If the Ethernet controller still cannot connect to the network, inform the network
administrator.
28
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide
when data is active on the Ethernet network. If the LAN activity LED is off, make
sure that the hub and network are operating and that the correct device drivers
are loaded.
server.
protocol.