4. Open the retaining clip on each end of the DIMM connector.
5. Touch the static-protective package that contains the DIMM option to any
6. Turn the DIMM so that the DIMM keys align correctly with the slot.
42
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide
Attention:
To avoid breaking the DIMM retaining clips or damaging the DIMM
connectors, open and close the clips gently.
unpainted metal surface on the server. Then, remove the DIMM from the
package.
Note: The following illustration shows installing DIMMs in an 8-DIMM-connector
memory board.