Table of Contents
Advertisement
5. Reinstall the cover and reconnect the external cables and power cords; then,
6. Repeat steps 2 on page 25 and 3 on page 25; then, move the jumper back to
7. Reinstall any components that were removed in step 3 on page 25; then,
Changing the position of this jumper does not affect the administrator password
check if an administrator password is set.
Attention:
overridden or removed. You must replace the operator information panel.
Forcing a power-on
Complete the following steps to turn on the server without pressing the power-on
button:
1. Read "Safety information" on page 147 and "Handling static-sensitive devices"
2. Turn off the server and peripheral devices and disconnect all external cables
3. Locate the force power-on jumper (J10), and place a jumper over the two pins.
4. Reinsert the microprocessor tray assembly fully into the server and reconnect
5. To return the jumper to its default position, repeat step 2; then, remove the
6. Reinsert the microprocessor tray assembly fully into the server and reconnect
26
IBM xSeries 365 Types 8861, 8862: Hardware Maintenance Manual and Troubleshooting Guide
turn on the server and access the Configuration/Setup Utility menu to change
the power-on password.
pins 1 and 2.
reinstall the cover and reconnect the external cables and power cord.
If an administrator password is set and then forgotten, it cannot be
on page 30.
and power cords; then, remove hot-swap fan number 2 (see "Replacing a
hot-swap fan" on page 55).
Force power-on
jumper (J10)
Microprocessor 3
VRM error LED
Microprocessor 3
VRM connector
Microprocessor 1
socket
Microprocessor 1
error LED
Microprocessor 2
error LED
Microprocessor 2
socket
the cables and power cords. The server will turn on.
jumper from J10.
the cables and power cords.
Light-path
diagnostics button
Microprocessor 4
VRM error LED
Microprocessor 4
VRM connector
Microprocessor 4
socket
Light-path
test LED
Microprocessor 4
error LED
Microprocessor 3
socket
Microprocessor 3
error LED
Advertisement
Table of Contents
