DIMM 1
DIMM 5
7. Insert the DIMM into the connector by aligning the edges of the DIMM with the
slots at the ends of the DIMM connector. Firmly press the DIMM straight down
into the connector by applying pressure on both ends of the DIMM
simultaneously. The retaining clips snap into the locked position when the DIMM
is firmly seated in the connector. If there is a gap between the DIMM and the
retaining clips, the DIMM has not been correctly inserted; open the retaining
clips, remove the DIMM, and then reinsert it.
8. Repeat steps 4 on page 42 through 7 for each additional DIMM that you install.
Close the DIMM access doors when you have finished.
9. If you have other options to install or remove, do so now; otherwise, go to
"Completing the installation" on page 58.
DIMM 2
DIMM 6
DIMM connector 2
DIMM connector 6
Retaining clips
Chapter 4. Installing options
43