Configuring A Protected Resource For Outlook Web Access - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

1.4.3 Configuring a Protected Resource for Outlook Web
Access
If you want to protect your Outlook Web Access server with the Access Gateway Appliance, you
need to configure the following Access Manager features. The instructions assume that you have a
functioning Outlook Web Access server and a functioning Access Manager system:
"Configuring a Protected Resource for Outlook Web Access" on page 42
"Configuring an Authentication Procedure" on page 42
"Configuring a Rewriter Profile" on page 43
"Configuring Identity Injection" on page 44

Configuring a Protected Resource for Outlook Web Access

The following instructions assume that you have a basic setup with at least one reverse proxy and
proxy service. If you don't have this basic setup, see
Authentication," on page 14
1 In the Administration Console, click Devices > Access Gateways > Edit > [Name of Reverse
Proxy].
2 In the Proxy Service List section, click New.
3 Specify a name for the proxy service, then click OK.
4 Click the newly added proxy service. Fill in the fields:
Proxy Service Name: Specify a display name for the proxy service, which the Administration
Console uses for its interfaces.
Published DNS Name: Specify the DNS name you want the public to use to access your site.
This DNS name must resolve to the IP address you set up as the listening address.
Multi-Homing Type: Select the multi-homing method that the Access Gateway should use to
identify this proxy service.
Web Server IP Address: Specify the IP address of the IIS Web server.
Host Header: Select the Web Server Host Name option.
Web Server Host Name: Specify the DNS name of the Outlook Web Access server that the
Access Gateway should forward to the Web server.
5 Click OK.
6 Continue with
Configuring an Authentication Procedure
1 Click Access Gateways > Edit > [Name of Reverse Proxy] > [Name of Proxy Service] >
Protected Resources.
2 Click New, then specify a display name for the resource.
3 (Optional) Specify a description for the protected resource. You can use it to briefly describe
the purpose for protecting this resource.
4 Select an authentication contract. If you want to enable non-redirected login, select Name/
Password - Basic as the authentication contract.
42 Novell Access Manager 3.1 SP2 Access Gateway Guide
and complete a basic setup before continuing.
"Configuring an Authentication Procedure" on page
Section 1.1, "Managing Reverse Proxies and
42.