Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual page 114

8b Specify an alias, click OK twice, then click Close.
This option imports the public key of the Identity Server into the trust store of the
Embedded Service Provider. This sets up a trusted SSL relationship between the
Embedded Service Provider and the Identity Server.
The configCA public key certificate of the Access Manager CA is automatically added to
the ESP Trust Store. If you are using Access Manager CA certificates for the Identity
Server, you do not need to import the configCA certificate unless someone has deleted it
from this trust store.
9 Click OK.
10 On the Server Configuration page, click OK.
11 On the Access Gateways page, click Update > OK.
The Embedded Service Provider is restarted during the update.
12 Update the Identity Server so that it uses the new SSL configuration. Click Identity Servers >
Update.
13 Verify that the trusted relationship between the Identity Server and the Access Gateway has
been reestablished.
13a Enter the URL to a protected resource on the Access Gateway.
13b Complete one of the following:
114 Novell Access Manager 3.1 SP2 Access Gateway Guide
If you are prompted for login credentials, enter them. The trusted relationship has
been reestablished.
If you receive a 100101043 or 100101044 error, the trusted relationship has not been
established. For information on solving this problem, see
100101043 and 100101044 Liberty Metadata Load
Manager 3.1 SP2 Identity Server
"Troubleshooting
Errors" in the
Guide.
Novell Access