Cos Related Issues - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

5c Make it the primary cluster server.
5d Delete the Access Gateway that is using the new IP address from the cluster and from the
Administration Console.

7.4.5 COS Related Issues

The following sections explain how to troubleshoot COS (cache object store) partition issues:
"Viewing COS Partition Details" on page 220
"Checking if the COS Partition Is Mounted" on page 220
Viewing COS Partition Details
You can view COS partition details either through YaST or through the nash prompt.
Using YaST
1 Log in as the
2 At command prompt, enter the following command:
fdisk -l
The partition details are displayed. Check for COS partition details. Make sure that a partition
is created with a partition ID of
Using nash
1 At the command prompt, enter the following command:
nash
2 At the
configure .current
3 Enter the following command:
vm scan
If the COS partition is already created, the details are displayed.
Checking if the COS Partition Is Mounted
1 Access the Access Gateway main screen.
For more information on how to access the Access Gateway main screen, see
"Using the Access Gateway Appliance Console," on page
2 Enter the Proxy Console option number at the Pick a Screen prompt.
The Access Gateway Console screen is displayed.
3 Enter the Display Cache Statistics option number at the Enter option prompt.
220 Novell Access Manager 3.1 SP2 Access Gateway Guide
user.
root
shell prompt, enter the following command:
nash
and that the file system is created as type
68 unknown
Section 7.1.3,
203.
.