Assigning An Identity Injection Policy To A Protected Resource - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

1.3.4 Assigning an Identity Injection Policy to a Protected
Resource
The Web application defines the requirements for Identity Injection. If a Web application has been
configured to look for certain fields in the header and the information cannot be found, the Web
application determines whether the user is denied access, granted access, or redirected. You
configure an Identity Injection policy to inject into the HTTP header the information that the Web
application requires.
1 Click Access Gateways > Edit > [Reverse Proxy Name] > [Name of Proxy Service] >
Protected Resources > [Name of Protected Resource] > Identity Injection.
The Identity Injection Policy List contains all the Identity Injection policies that have been
created on this Administration Console for the selected policy container.
2 Select one of the following:
To enable an existing policy, select the policy, then click Enable. Only the policies that are
enabled are applied to this resource. Continue with
To disable an existing policy, select the policy, then click Disable. Continue with
To edit an existing policy, click the name of the policy. Remember that policies can be
assigned to multiple protected resources. If you modify the policy, you are also affecting
how this policy protects those resources. For configuration information, see
Identity Injection
When you have finished your policy modifications, continue with
To create a new policy, click Manage Policies. On the Policies page, click New, specify a
display name, select Access Gateway: Identity Injection as the type, then click OK. For
configuration information, see
Manager 3.1 SP2 Policy
When you have created your policy, continue with
3 To enable the policy you just created, select the policy, then click Enable.
Only the policies that are enabled are applied to this resource. If you use the same policy for
multiple protected resources, use the policy description field to indicate this.
4 To save your changes to the browser cache, click OK.
5 To apply your changes, click the Access Gateways link, then click Update > OK.
32 Novell Access Manager 3.1 SP2 Access Gateway Guide
Policies" in the Novell Access Manager 3.1 SP2 Policy
"Creating Identity Injection
Guide.
Step 4.
Guide.
Step 4.
Policies" in the Novell Access
Step 3.
Step 4.
"Creating