Scheduling A Command; Managing General Details Of The Access Gateway; Section 2.4, "Managing General Details Of The Access Gateway - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

2.3.2 Scheduling a Command

Use the Schedule New Command page to schedule a command, such as a shutdown, restart, or
upgrade.
1 In the Administration Console, click Devices > Access Gateways.
2 (Conditional) To schedule a shutdown or restart, select a server, then click Actions > Schedule
Restart or Schedule Stop. Continue with
3 (Conditional) To schedule an upgrade for the Access Gateway Appliance, click [Name of
Server] > Upgrade > Schedule Upgrade.
4 Fill in the following fields:
Name Scheduled Command: (Required) Specify a name for this scheduled command. This
name is used in log files.
Description: (Optional) Specify a reason for the command.
Date & Time: Select the day, month, year, hour, and minute when the command should
execute.
The following fields display information about the command you are scheduling:
Type: Displays the type of command that is being scheduled, such as Access Gateway
Shutdown, Access Gateway Restart, or Access Gateway Upgrade.
Server: Displays the name of the server that the command is being scheduled for.
5 Click OK to schedule the command.
2.4 Managing General Details of the Access
Gateway
The Server Details page allows you to perform general maintenance actions on the selected Access
Gateway.
1 In the Administration Console, click Devices > Access Gateways > [Name of Access Gateway].
2 Select one of the following options:
Edit: Click this option to edit the general details of the Access Gateway. See
"Changing the Name of an Access Gateway and Modifying Other Server Details," on page
Upgrade: (Access Gateway Appliance) Click this option to upgrade the software to the newest
release. For more information on this process, see
Gateway Software," on page
New NIC: (Access Gateway Appliance) Click this action to trigger a scan to detect a new
network interface card that you have added to the machine after installing the Access Gateway
Appliance. This might take some time. For more information, see
Network Interfaces to the Access Gateway Appliance," on page
New IP: (Access Gateway Service) Click this action to trigger a scan to detect new IP
addresses. This might take some time. If you have used a system utility to add an IP address
after you have installed the Access Gateway Service, use this option to update the Access
Gateway Service to display the new IP address as a configuration option. For more information
about this option, see
Service," on page 105.
Step 4.
83.
Section 2.9.6, "Adding a New IP Address to the Access Gateway
Section 2.4.2, "Upgrading the Access
Section 2.9.5, "Adding New
104.
Server Configuration Settings
Section 2.4.1,
82.
81