The Access Gateway Service Log Files - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

net start apache2.2
6 (Optional) If you set the level to debug and the log file still does not supply enough
information, see

8.1.2 The Access Gateway Service Log Files

Filename
Linux: error_log
Windows:
rcnovell-apache2.out
ags_error.log
jcc-0.log.x
246 Novell Access Manager 3.1 SP2 Access Gateway Guide
Section 8.3, "Enabling Debug Mode and Core Dumps," on page
Description
Contains the Apache messages generated for get and response traffic
from the browsers.
error.log
For information on setting the logging level for this file, see
the Logging Level for the Apache Logs" on page
To add X-Mag header or Form Fill messages, enable the advanced
options. See
Options," on page
Linux: The log file is located in the
directory.
Windows: The log file is located in the
Files\Novell\Apache\logs
Contains the Apache messages generated at start up. Apache does not
generate this file for Windows.
For information on setting the logging level for this file, see
the Logging Level for the Apache Logs" on page
Linux: The log file is located in the
directory.
Contains the messages generated for configuration, device imports,
health, and statistics. It also contains entries for the policy evaluation
processes done by the Gateway Service Manager module.
Linux: The log file is located in the
logs
Windows: The log file is located in the
Files\Novell\amlogging\logs
Contains the messages generated between the Administration Console
and the JCC module.
Linux: The log file is located in the
logs
Windows: The log file is located in the
Files\Novell\devman\jcc\logs
Section 5.7, "Advanced Access Gateway Service
180.
directory.
directory.
250.
"Modifying
245.
/var/log/novell-apache2
\Program
directory.
"Modifying
245.
/var/log/novell-apache2
/var/opt/novell/amlogging/
\Program
directory.
/opt/novell/devman/jcc/
\Program
directory.