Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual page 34

4 Click Form Fill.
The Form Fill Policy List contains all the Form Fill policies that have been created on this
Administration Console for the selected policy container.
5 Select one of the following:
To enable an existing policy, select the policy, then click Enable. Only the policies that are
enabled are applied to this resource. Continue with
To disable an existing policy, select the policy, then click Disable. Continue with
To edit an existing policy, click the name of the policy. Remember that policies can be
assigned to multiple protected resources. If you modify the policy, you are also affecting
how this policy protects those resources. For configuration information, see
Form Fill
When you have finished the policy modifications, continue with
To create a new policy, click Manage Policies. On the Policies page, click New, specify a
display name, select Access Gateway: Form Fill as the type, then click OK. For
configuration information, see
Manager 3.1 SP2 Policy
When you have created your new policy, continue with
6 To enable the policy you just created, select the policy, then click Enable.
Only the policies that are enabled are applied to this resource. If you use the same policy for
multiple protected resources, use the policy description field to indicate this.
7 To save your changes to the browser cache, click OK.
8 To apply your changes, click the Access Gateways link, then click Update > OK.
IMPORTANT: If you enable a Form Fill policy for a protected resource that has been assigned to
use a contract that does not prompt the user for a password and the Form Fill policy contains a field
for the user's password, single sign-on cannot be enabled because the password is not available. To
enable single sign-on, you need to use an Authentication class that retrieves the user's password and
injects it into the user's credentials when the user authenticates using a non-password method such
as X.509, RADIUS, smart card, or Kerberos. For information about such a class, see
Password Retrieval" in the
34 Novell Access Manager 3.1 SP2 Access Gateway Guide
Policies" in the Novell Access Manager 3.1 SP2 Policy
"Creating Form Fill
Guide.
Novell Access Manager 3.1 SP2 Identity Server
Step 7.
Guide.
Step 7.
Policies" in the Novell Access
Step 6.
"Configuring
Guide.
Step 7.
"Creating