Useful Tools - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

Section 7.1.3, "Using the Access Gateway Appliance Console," on page 203
Section 7.1.4, "Viewing Configuration Information," on page 206

7.1.1 Useful Tools

Table 7-1 describes some of the tools available in the Linux operating system or installed by the
Access Gateway that can help you determine the cause of a problem.
Useful Tools
Table 7-1
Tool
Re-push Current Configuration
Health icon
curl
tail -f
proc
netstat /ss
netcat
tcpdump
nash
/etc/init.d/novell-vmc
The /chroot/lag/opt/novell/bin
202 Novell Access Manager 3.1 SP2 Access Gateway Guide
Description
If you have an Access Gateway that does not seem to be using
the current configuration, you can use the Administration Console
to push the current configuration to the Access Gateway. Click
Auditing > Troubleshooting. In the Current Access Gateway
Configuration section, select an Access Gateway, then click Re-
push Current Configuration.
In the Administration Console, click the Health icon to view details
about the health of the Access Gateway. For more information,
see Section 4.8.2, "Monitoring the Health of an Access Gateway,"
on page 158.
Use this command to view identity provider metadata from the
Access Gateway. See "Testing Whether the Provider Can Access
the Metadata" in the Novell Access Manager 3.1 SP2 Identity
Server Guide.
Use this command to view real time activity in key log files. For
information on useful files to tail, see
Files to Troubleshoot the Access Gateway Appliance" on
page 206.
Use this command to check resources available on the system.
Use this command to view statistics about the listeners on the
Access Gateway.
Use this command to access the Access Gateway console, which
displays statistics and information about various processes.
For more information, see
Console" on page 203.
Use this command to capture data on standard and loopback
interfaces and to view SSL data with imported keys.
Use this command to manually configure log level verbosity and
to replace IP addresses. For log level information, see
Gateway Appliance Logs" on page
Use the novell-vmc command line options to restart the proxy
and view status. For more information, see
page 203.
directory contains the following scripts:
"Using Log Files and Touch
"Using the Access Gateway Appliance
123.
Table 7-2 on
"Access