Configuring Advanced Options For Path-Based Multi-Homing - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

4c To return to the Path-Based Multi-Homing page, click the Overview tab, then click OK.
4d Click OK, select the name of the parent proxy service, then click Protected Resources.
4e In the Protected Resource List, click New, specify a name, then click OK.
4f Select an Authentication Procedure.
4g In the URL Path List, specify the path you used when creating the path-based proxy
service. For example, if your path was
List.
IMPORTANT: If you create multiple protected resources that exactly match the path-
based multi-homing service, there is no guarantee that a specific protected resource will be
used. For example, if you create protected resources for both of the paths specified above
(
these protected resources could be assigned to this path-based service in the
Administration Console or used when access is requested.
4h Make sure the protected resource you created is enabled. If the resource is disabled, it does
not appear in the Path List for the path-based proxy service.
4i (Optional) Enable the policies the path-based proxy service requires. Click Authorization,
Identity Injection, or Form Fill and enable the appropriate policies.
4j Click OK.
5 To save your changes to browser cache, click OK.
6 To apply the changes, click the Access Gateways link, then click Update > OK.
6.2.6 Configuring Advanced Options for Path-Based Multi-
Homing
(Access Gateway Service) If the proxy service is protecting a WebDAV application, you need to
configure the advanced option.
1 In the Administration Console, click Devices > Access Gateways > Edit > [Name of Reverse
Proxy] > [Name of Path-Based Multi-Homing Proxy Service] > Advanced Options.
2 Configure the following option:
#NAGChildOptions WebDav=/Path: Allows the proxy service to handle the specified path.
Remove the pound (#) symbol and replace /Path with the path you want the proxy service to
handle.
192 Novell Access Manager 3.1 SP2 Access Gateway Guide
If the protected resource meets your needs, continue with
If the protected resource does not meet your needs, you must create a protected
resource for the path-based proxy service. Continue with
and ) and you have a path-based service with a path of
/apps /apps/*
Step 5
Step
, specify
/apps /apps/*
4d.
or in the URL Path
/apps
, either of
/apps