Memory Issues - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

The following details are displayed if the COS partition is mounted:

7.4.6 Memory Issues

The following sections explain how to troubleshoot memory issues:
"Checking Memory Details and Related Information" on page 222
"Checking Available Memory" on page 222
Checking Memory Details and Related Information
Most of the information, including the memory details, can be accessed by entering the following
command at the
top
Ensure that the Access Gateway does not occupy more than the percentage of the memory
requirements you set.The ics_dyn process occupies approximately 20 to 25 percent of the total
memory by default.
Levels
Lower Limit
Requirement for Access Gateway
Upper Limit
Default
Checking Available Memory
As the
root
222 Novell Access Manager 3.1 SP2 Access Gateway Guide
prompt:
bash
user, enter the following command at the bash prompt:
Requirement
5 Percent
500 MB
80 percent
20 percent