Examining The Debug Information; Disabling Debug Mode - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

Windows
Use the following steps to enable debug mode:
1 Create a directory at the root of
tmp
2 Stop Apache:
2a Click Control Panel > Administrative Tools > Services.
2b Right-click the Apache 2.2 service, then select Stop.
3 Start Apache:
3a Right-click the service, then click Properties.
3b In the Start parameters box, specify
-D allowServerDebug
3c Click Start.

8.3.2 Examining the Debug Information

1 Examine the Apache error log file or copy it so you can send it to Novell Technical Support:
Linux:
/var/log/novell-apache2
Windows:
\Program Files\Novell\apache\logs
2 View the information at the local URLs or copy the pages to send to Novell Support:
http://127.0.0.1:8181/server-status
This page displays debug information about caching, SSL, workers, and proxy
information.
http://127.0.0.1:8181/server-info
This page displays module and configuration information.
3 If a crash occurred, examine the core dump file or copy it so you can send it to Novell
Technical Support.
Linux:
/var/cache/novell-apache2
Windows: directory that you created
C:\tmp

8.3.3 Disabling Debug Mode

"Linux" on page 251
"Windows" on page 252
Linux
Use the following commands to disable debug mode:
/etc/init.d/novell-apache2 stop
/etc/init.d/novell-apache2 start nodebug
C:
Troubleshooting the Access Gateway Service 251