Configuring A Path-Based Multi-Homing Proxy Service - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

Host Header: Specify whether the HTTP header should contain the name of the back-end Web
server (Web Server Host Name option) or whether the HTTP header should contain the
published DNS name (the Forward Received Host Name option).
For a path-based multi-homing service, it is usually best to select the Web Server Host Name
option. For more information, see
Web Server Host Name: Specify the DNS name of the Web server that the Access Gateway
should forward to the Web server. If you have set up a DNS name for the Web server and the
Web server requires its DNS name in the HTTP header, specify that name in this field. If you
selected Forward Received Host Name, this option is not available.
For iChain administrators, the Web Server Host Name is the alternate hostname when
configuring a Web Server Accelerator.
4 Click OK.
5 To continue, select one of the following:
To configure a virtual or domain-based proxy service, see
Proxy Service," on page
To configure a path-based proxy service, see
Multi-Homing Proxy Service," on page

6.2.5 Configuring a Path-Based Multi-Homing Proxy Service

To configure a path-based proxy service:
1 In the Administration Console, click Devices > Access Gateways > Edit > [Name of Reverse
Proxy] > [Name of Path-Based Multi-Homing Proxy Service].
The following fields display information that must be configured on the parent proxy service
(the first proxy service created for this reverse proxy).
190 Novell Access Manager 3.1 SP2 Access Gateway Guide
"Configuring the Host Header Option" on page
19.
Section 6.2.5, "Configuring a Path-Based
190.
186.
Section 1.1.2, "Configuring a