Using The Linux Access Gateway Monitor Service; Using The Access Gateway Appliance Console - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

Access gateway guide
Hide thumbs Also See for ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010:
Table of Contents

Advertisement

Tool
getlaglogs.sh
lagupgrade.sh
lagconfigure.sh
You can use the following commands to stop and start the Access Gateway and to view its status.
novell-vcm Commands
Table 7-2
Command
/etc/init.d/novell-vmc start
/etc/init.d/novell-vmc stop
/etc/init.d/novell-vmc status
/etc/init.d/novell-vmc restart

7.1.2 Using the Linux Access Gateway Monitor Service

The Linux Access Gateway monitor service checks the disk usage and proxy services. If the proxy
services enter into non-responsive state, the monitor service restarts the proxy services
automatically.
You can use the following commands to start, stop, add, remove, and view the status of lagmonitor
service.
Command
/etc/init.d/lagmonitor start
/etc/init.d/lagmonitor stop
chkconfig -a lagmonitor
chkconfig -d lagmonitor
chkconfig -l lagmonitor

7.1.3 Using the Access Gateway Appliance Console

1 To access the console, run the following command:
netcat localhost 2300
2 Press Enter at the
Please enter terminal type
Description
Generates a
/var/log/laglogs.tar.gz
system log files. For more information, see
Logs" on page
229.
Use this script to apply patches. For more information, see
"Upgrading the Linux Access Gateway
Access Manager 3.1 SP2 Installation
Use this script to resolve auto-import issues. For more
information, see
"Triggering an Import
Manager 3.1 SP2 Installation
Description
Starts the Access Gateway Appliance.
Stops the Access Gateway Appliance.
Displays the status of the Access Gateway Appliance.
Stops and starts the Access Gateway Appliance.
Description
Starts the lagmonitor service.
Stops the lagmonitor service.
Adds the lagmonitor scripts to the initservices
Removes the lagmonitor scripts from the initservices
Displays the lagmonitor scripts status.
prompt.
Troubleshooting the Access Gateway Appliance 203
file of the install and
"Access Gateway
Appliance" in the
Guide.
Retry" in the
Novell Access
Guide.
Novell

Advertisement

Table of Contents
loading

Table of Contents