Customizing Error Pages On The Access Gateway Appliance; Section 2.7, "Customizing Error Pages On The Access Gateway Appliance - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

If the Access Gateway does not belong to a cluster, this option is not available.
3 Fill in the following fields:
Server Date and Time: Displays the current time and allows you to set the current time. Click
Set Date & Time Manually, then select the current year, month, day, hour, and minute.
IMPORTANT: If the date is set to a time before the Access Gateway certificates are valid,
communication to the Access Gateway is lost. This error cannot be corrected from the
Administration Console. You need to correct it at the console of the Access Gateway machine.
Use the command and select System > Date and Time.
yast
Set Up NTP: Click this option to specify the DNS name or IP address of a Network Time
Protocol server. The installation program enters the name of
a public NTP server. To disable this feature, you must remove all servers from the NTP Server
List. This is not recommended.
Time Zone: Select your time zone, then click OK. Regardless of the method you used to set the
time, you must select a time zone.
4 To save your changes to the browser cache, click OK.
5 On the Server Configuration page, click OK.
6 To apply your changes, click Update > OK.
2.7 Customizing Error Pages on the Access
Gateway Appliance
The Access Gateway Appliance uses the custom error page template to rebrand and localize the
language of error pages that are published to the browser.
By default, the Access Gateway Appliance contains the following files to help customize and
localize the error messages:
The error page configuration file,
The error page template file,
The error messages file,
NOTE: If you are modifying any of the above files, ensure that you retain the original filenames.
The Access Gateway Appliance maintains three directories to save files that are used for error page
configuration:
/
var/novell/errorpagesconfig/.factory
/var/novell/errorpagesconfig/.backup
/var/novell/errorpagesconfig/current
During the initial installation, the default template files are copied to the
directories. If you have not customized the files in the
do not overwrite these files.
When the next version of the files is installed, the files in the
directory with the format
.backup
and customized files are always available in the
ErrorPagesConfig.xml
ErrorPageTemplate.htm.en
ErrorMessages.xml.en
<filename>.oldBuildNo
.backup
pool.ntp.org
.factory
directory, subsequent installations
current
directory are copied to the
current
. This ensures that the old build files
directory.
Server Configuration Settings
, the DNS name of
and the
current
91