Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual page 136

IP address of the client
Remote host name
The request line as it came from the client
The HTTP status code returned to the client
The number of bytes in the document transferred to the client
The Access Gateway does not allow active log files to be deleted. Only log files that have been
closed can be deleted. The rollover options allow you to control when a file is rolled over and
closed, and a new file is created. The old file options allow you to control when the rolled-over log
files are deleted.
To configure a default log file for a selected proxy service:
1 Click Devices > Access Gateways > Edit > [Name of Reverse Proxy] > [Name of Proxy
Service] > Logging > [Name of Common Log Profile].
2 Select one of the following rollover options:
Rollover When File Size Reaches: Rolls the file when it reaches the specified number of
megabytes.
Rollover every: Rolls the file at the specified interval. You can specify the interval in hours or
days.
beginning: Specifies the day that the interval should begin. You can select a day of the
week or the first of the month.
at: Select the hour of the day that the interval should begin and the time zone (either the
local time zone or GMT).
3 (Access Gateway Appliance) Select one of the following old file options:
Limit Number of Files to: Allows you to limit the number of old log files on the system to the
number specified in this option. The oldest file is automatically deleted when this number is
reached. All logging data in deleted files is lost.
Delete Files Older Than: Allows you to configure the Access Gateway to delete files when
they are older than the time you specify. All logging data in deleted files is lost.
Do Not Delete: Prevents the system from automatically deleting the log files.
4 Click OK.
5 Click the Access Gateways link, then click Update > OK.
136 Novell Access Manager 3.1 SP2 Access Gateway Guide