Configuring Logging Of Soap Messages And Http Headers - Novell ACCESS MANAGER 3.1 SP2 - ACCESS GATEWAY GUIDE 2010 Manual

Number
08
09
11
12
14
15
16
17
4.1.3 Configuring Logging of SOAP Messages and HTTP
Headers
1 On the Linux Access Gateway Appliance, log in as
2 At the command prompt, enter the following command:
nash
3 To enter the configuration mode, enter the following command:
configure .current
4 Enter one of the following commands to configure logging:
Command
log-conf debug-soap-messages enable
log-conf no debug-soap-messages
enable
log-conf debug-http-headers enable
log-conf no debug-http-headers
enable
5 To apply changes, enter the following command:
apply
6 To exit from the configuration mode, enter the following command:
exit
7 To exit from the nash shell, enter the following command:
exit
Component
Caching
Response Processing
Rewriting
Soap Channel
IVM
Connection Manager.
VXE
DataStream
.
root
Purpose
Logs all the SOAP messages between the
Access Gateway and the Embedded Service
Provider to the
/var/log/lagsoapmessages
file.
Disables the logging of SOAP messages
between the Access Gateway and the
Embedded Service Provider.
Logs all the HTTP headers between the
browsers and the Access Gateway and between
the Access Gateway and the Web servers to the
/var/log/laghttpheaders
Disables the logging of HTTP headers to the
/var/log/laghttpheaders
Access Gateway Maintenance 125
file.
file.