Unseat Hard Disk Drives from Hard Disk Drive Bays
A. Pressing down on the hard disk drive handle release mechanisms, unlatch the handle on the
hard disk drives and hard disk drive carriers. See Figure 2.
B. Rotate the hard disk drive and hard disk drive carrier handles downward. See Figure 2.
C. Slide the hard disk drives and hard disk drive carriers at least halfway out of the hard disk drive
bays. See Figure 2. It is not necessary to completely remove the hard disk drives from the bays.
A
Figure 2. Unseat Hard Disk Drives and Hard Disk Drive Carriers
NOTE: If a hard disk is completely removed from the Storage System Console, it must be re-
installed into the exact same drive bay. Refer to the Intel
User's Guide for more details.
®
Intel
Storage System SSR316MJ2 Backplane Board
B
C
®
Storage System SSR316MJ2 Quick Start
9