Intel® Entry Storage System SS4000-E
A
1.2
System Board Feature Set
®
The Intel
Entry Storage System SS4000-E Board provides the following feature set, as
implemented in the Intel
Feature
Processor
Single IOP80219 544 LPBGA (35mm) package with 200 MHz internal bus speed.
Memory
IMPORTANT: Intel® Entry Storage System SS4000-E uses an 80219
processor which supports a maximum of 1GB of 64 bit DDR SDRAM system
memory and 512MB of 32 bit DDR SDRAM. The system ships with 256MB
memory installed and as configured will support a maximum of 512 MB
memory.
NOTE: For specific memory recommendations please refer to the Tested
Hardware and OS List (THOL).
NOTE: The Intel Entry Storage System SS4000-E ships with 256MB memory. Only
qualified service personnel should service system memory.
Peripheral
1 32-bit PCI bus operating at 33MHz providing connection for:
Interfaces
LAN
Intel
Network (LAN) Controller.
Fans
Support for one system fan
Revision 1.2
A
System Memory
B
Front Panel Cable Connector
Figure 4. System Components – Left Side
®
Entry Storage System SS4000-E:
•
2 10/100/1000 Megabits per second (Mb/s) Ethernet LAN ports
•
2 USB 2.0 ports
•
1 Serial ATA 4 port controller operating at 1.5Gigabits per second
®
82541 Dual 10/100/1000 Megabits per second (Mb/s) Ethernet Local Area
TP000229
Description
Feature Summary
B
7