Removing And Installing The Front Bezel; Removing The Front Bezel; Installing The Front Bezel; Figure 11. Removing The Front Bezel - Intel JBOD2000S3SP Service Manual

2.4 Removing and Installing the Front Bezel

2.4.1

Removing the Front Bezel

If your system includes a front bezel, follow these steps to remove the front bezel:
1. Unlock the bezel if it is locked.
2. Remove the left end of the front bezel from the rack handle (see letter "A").
3. Rotate the front bezel anticlockwise to release the latches on the right end from the rack handle
(see letter "B").
2.4.2

Installing the Front Bezel

NOTE: Before installing the bezel, you must install the rack handles.
1. Lock the right end of the front bezel to the rack handle (see letter "A").
2. Rotate the front bezel clockwise till the left end clicks into place (see letter "B").
3. Lock the bezel if needed.
Intel also provides an optional plastic badge for customer to use. To install the badge to the bezel, attach the
badge onto the bezel until the hooks at the rear of the badge click into the bezel.
Intel® Storage Server System JBOD2000S3 Service Guide

Figure 11. Removing the Front Bezel

Figure 12. Installing the Front Bezel

7