Computer Setup (Continued)
Heading
Option
Hardware
Reset Case Open Status
Monitor Setup
CPU Temperature
CPU Fan Speed
System Fan Speed
CPU Fan Fault Detect
SYS Fan Fault Detect
Load Defaults
Setting
Set Supervisor
Password
Set User
Password
Save Setting
and Exit
Exit Without
Saving
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Computer Setup (F10) Utility Guide
Description
Reset Case Open Status
(view only)
(view only)
(view only)
Disables/enables detection of CPU failure
during POST.
Disables/enables detection of Fan failure
during POST.
Allows you to reset Computer Setup to
factory defaults.
Allows you to establish a password to control
access to Computer Setup.
Allows you to establish a password to control
access to the computer.
Allows you to save current settings and exit
Computer Setup.
Allows you to exit Computer Setup without
saving changes.
www.hp.com
Computer Setup (F10) Utility
12