Memoryexpansion; Removing The Memory Expansion Slot Cover - Compaq Armada 7800 6266 T 5000 D M 1 Maintenance And Service Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.10 Memory Expansion
Removing the Memory Expansion
Slot Cover
The memory expansion compartment is located on the bottom of the computer. Either
one or two memory expansion boards can be installed at a time.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Before
beginning this procedure, ensure that you are properly grounded. For more information,
refer to Appendix C, "Electrostatic Discharge."
1. Prepare the computer for disassembly (Section 5.4).
2. Remove any battery pack(s) from the computer (Section 5.7).
WARNING: Failure to unplug the power cord and remove the battery pack before
!
installing a memory expansion board can damage the equipment and expose you to the
risk of electrical shock.
3. Turn the computer upside down and position it so the rear panel faces forward.
5-28 Removal and Replacement Procedures