Figure 47: Stp/Rstp/Cist Port Configuration - SMC Networks SMCGS10C-SMART Management Manual

| Configuring the Switch
C 4
HAPTER
Configuring the Spanning Tree Algorithm
Point-to-Point – The link type attached to an interface can be set to
◆
automatically detect the link type, or manually configured as point-to-
point or shared medium. Transition to the forwarding state is faster for
point-to-point links than for shared media. These options are described
below:
Auto – The switch automatically determines if the interface is
■
attached to a point-to-point link or to shared medium. (This is the
default setting.)
When automatic detection is selected, the switch derives the link
type from the duplex mode. A full-duplex interface is considered a
point-to-point link, while a half-duplex interface is assumed to be on
a shared link.
Forced True – A point-to-point connection to exactly one other
■
bridge.
Forced False – A shared connection to two or more bridges.
■
W I
EB NTERFACE
To configure settings for STP/RSTP/CIST interfaces:
Click Configuration, Spanning Tree, CIST Ports.
1.
Modify the required attributes.
2.
Click Save.
3.

Figure 47: STP/RSTP/CIST Port Configuration

– 128 –