Displaying Information On Authentication Servers; Displaying A List Of Authentication Servers; Figure 104: Radius Overview - SMC Networks SMCGS10C-SMART Management Manual

D I
ISPLAYING NFORMATION ON
D L
ISPLAYING A IST OF
A
UTHENTICATION
S
ERVERS
A
UTHENTICATION
Use the Monitor/Authentication pages to display information on RADIUS
authentication and accounting servers, including the IP address and
statistics for each server.
Use the RADIUS Overview page to display a list of configured
authentication and accounting servers.
P
ATH
Monitor, Security, AAA, RADIUS Overview
P
ARAMETERS
These parameters are displayed:
IP Address – The IP address and UDP port number of this server.
◆
Status – The current state of the server. This field takes one of the
◆
following values:
Disabled – The server is disabled.
■
Not Ready – The server is enabled, but IP communication is not
■
yet up and running.
Ready – The server is enabled, IP communication is up and
■
running, and the RADIUS module is ready to accept access
attempts.
Dead (X seconds left) – Access attempts were made to this server,
■
but it did not reply within the configured timeout. The server has
been temporarily disabled, but will be re-enabled when the dead-
time expires. The number of seconds left before this occurs is
displayed in parentheses.
W I
EB NTERFACE
To display a list of configured authentication and accounting servers, click
Monitor, Security, AAA, RADIUS Overview.

Figure 104: RADIUS Overview

– 221 –
| Monitoring the Switch
C 5
HAPTER

Displaying Information on Authentication Servers

S
ERVERS