Vlan Port Status; Figure 126: Showing Vlan Members - SMC Networks SMCGS10C-SMART Management Manual

| Monitoring the Switch
C 5
HAPTER
Displaying Information About VLANs
VLAN P S
ORT TATUS
MSTP: The 802.1s Multiple Spanning Tree protocol uses VLANs to
■
create multiple spanning trees in a network, which significantly
improves network resource utilization while maintaining a loop-free
environment.
Combined: Shows information for all active user modules.
■
VLAN ID – A VLAN which has created by one of the software modules.
◆
◆ Port Members – The ports assigned to this VLAN.
W I
EB NTERFACE
To display VLAN members, click Monitor, VLANs, VLAN Membership.
1.
Select a software module from the drop-down list on the right side of
2.
the page.

Figure 126: Showing VLAN Members

Use the VLAN Port Status page to show the VLAN attributes of port
members for all VLANs configured by a selected software module, including
PVID, VLAN aware, ingress filtering, frame type, egress filtering, and UVID.
Refer to the preceding section for a description of the software modules
that use VLAN management services.
P
ATH
Monitor, VLANs, VLAN Port
P
ARAMETERS
These parameters are displayed:
VLAN User – A software module that uses VLAN management services
◆
to configure VLAN membership and VLAN port settings such as the
PVID or untagged VLAN ID. Refer to the preceding section for a
description of the software modules that use VLAN management
services.
Port – Port Identifier.
◆
PVID – The native VLAN assigned to untagged frames entering this
◆
port.
– 248 –