Table of Contents
Advertisement
P
C
ORT
ONFIGURATION
- SFP-Forced - Always uses the SFP port (even if module is not
installed).
- SFP-Preferred-Auto - Uses SFP port if both combination types are
functioning and the SFP port has a valid link. (This is the default.)
• Trunk – Indicates if a port is a member of a trunk. To create trunks and
select port members, see "Creating Trunk Groups" on page 9-8.
Note: Auto-negotiation must be disabled before you can configure or
force the interface to use the Speed/Duplex Mode or Flow
Control options.
Web – Click Port, Port Configuration or Trunk Configuration. Modify the
required interface settings, and click Apply.
9-6
Figure 9-2 Port - Port Configuration
Advertisement
Table of Contents
