System Defaults; Table 2: System Defaults - SMC Networks SMCGS10C-SMART Management Manual

| Introduction
C 1
HAPTER

System Defaults

Q S
UALITY OF ERVICE
M F
ULTICAST ILTERING
S D
YSTEM EFAULTS
Differentiated Services (DiffServ) provides policy-based management
mechanisms used for prioritizing network resources to meet the
requirements of specific traffic types on a per-hop basis. Each packet is
classified upon entry into the network based on access lists, DSCP values,
or VLAN lists. Using access lists allows you select traffic based on Layer 2,
Layer 3, or Layer 4 information contained in each packet. Based on
network policies, different kinds of traffic can be marked for different kinds
of forwarding.
Specific multicast traffic can be assigned to its own VLAN to ensure that it
does not interfere with normal network traffic and to guarantee real-time
delivery by setting the required priority level for the designated VLAN. The
switch uses IGMP Snooping and Query to manage multicast group
registration for IPv4 traffic, and MLD Snooping for IPv6 traffic. It also
supports Multicast VLAN Registration (MVR) which allows common
multicast traffic, such as television channels, to be transmitted across a
single network-wide multicast VLAN shared by hosts residing in other
standard or private VLAN groups, while preserving security and data
isolation for normal traffic.
The switch's system defaults are provided in the configuration file
"Factory_Default_Config.cfg." To reset the switch defaults, this file should
be set as the startup configuration file.
The following table lists some of the basic system defaults.

Table 2: System Defaults

Function Parameter
Authentication User Name
Password
RADIUS Authentication
TACACS+ Authentication
802.1X Port Authentication
HTTPS
SSH
Port Security
IP Filtering
Web Management HTTP Server
HTTP Port Number
HTTP Secure Server
HTTP Secure Server Redirect
– 25 –
Default
"admin"
"admin"
Disabled
Disabled
Disabled
Enabled
Enabled
Disabled
Disabled
Enabled
80
Disabled
Disabled