SMC Networks SMCGS10C-SMART Management Manual page 123

Enter the spanning tree priority for the CIST and selected MST instance
3.
on the MSTI Priorities page.
All VLANs are automatically added to the CIST (MST Instance 0).
N :
OTE
To ensure that the MSTI maintains connectivity across the network, you
must configure a related set of bridges with the same MSTI settings.
P
ARAMETERS
These parameters are displayed:
Configuration Identification
Configuration Name
◆
32 characters; Default: switch's MAC address)
Configuration Revision
◆
(Range: 0-65535; Default: 0)
MSTI Mapping
MSTI – Instance identifier to configure. The CIST is not available for
◆
explicit mapping, as it will receive the VLANs not explicitly mapped.
(Range: 1-7)
◆ VLANs Mapped – VLANs to assign to this MST instance. The VLANs
must be separated with comma and/or space. A VLAN can only be
mapped to one MSTI. (Range: 1-4094)
W I
EB NTERFACE
To add VLAN groups to an MSTP instance:
Click Configuration, Spanning Tree, MSTI Mapping.
1.
Enter the VLAN group to add to the instance in the VLANs Mapped
2.
column. Note that the specified member does not have to be a
configured VLAN.
Click Save
3.
2. The MST name and revision number are both required to uniquely identify an MST region.
– 123 –
C
HAPTER
Configuring the Spanning Tree Algorithm
– The name for this MSTI. (Maximum length:
2
– The revision for this MSTI.
2
| Configuring the Switch
4