Table of Contents
Advertisement
C
ONFIGURING THE
•
Re-authentication Period – Sets the time period after which a
connected client must be re-authenticated. (Range: 1-65535 seconds;
Default: 3600 seconds)
•
TX Period – Sets the time period during an authentication session that
the switch waits before re-transmitting an EAP packet. (Range:
1-65535; Default: 30 seconds)
•
Authorized
- Yes – Connected client is authorized.
- No – Connected client is not authorized.
- Blank – Displays nothing when dot1x is disabled on a port.
•
Supplicant – Indicates the MAC address of a connected client.
•
Trunk – Indicates if the port is configured as a trunk port.
Web – Click Security, 802.1x, Port Configuration. Modify the parameters
required, and click Apply.
3-82
S
WITCH
Figure 3-36 802.1x Port Configuration
Advertisement
Table of Contents
