Configuring Port Connections; Figure 10: Configuring Thermal Protection - SMC Networks SMCGS10C-SMART Management Manual

| Configuring the Switch
C 4
HAPTER

Configuring Port Connections

C P
ONFIGURING ORT
W I
EB NTERFACE
To configure the thermal protection:
Click Configuration, Thermal Protection.
1.
Select the circuits which will use EEE.
2.
Se the temperature threshold for each priority, and then assign a
3.
priority level to each of the ports.
Click Save.
4.

Figure 10: Configuring Thermal Protection

C
ONNECTIONS
Use the Port Configuration page to configure the connection parameters for
each port. This page includes options for enabling auto-negotiation or
manually setting the speed and duplex mode, enabling flow control, setting
the maximum frame size, specifying the response to excessive collisions,
or enabling power saving mode.
P
ATH
Configuration, Ports
P
ARAMETERS
These parameters are displayed:
Link – Indicates if the link is up or down.
◆
– 52 –