Table 12: Qce Modification Buttons - SMC Networks SMCGS10C-SMART Management Manual

SMAC - The OUI field of the source MAC address, i.e. the first three
◆
octets (bytes) of the MAC address.
DMAC - The type of destination MAC address. Possible values are: Any,
◆
Broadcast, Multicast, Unicast.
VID – VLAN identifier. (Range: 1-4095)
◆
Action – Indicates the classification action taken on ingress frame if
◆
the configured parameters are matched in the frame's content. If a
frame matches the QCE, the following actions will be taken:
Class (Classified QoS Class) – If a frame matches the QCE, it will be
■
put in the queue corresponding to the specified QoS class.
DPL – The drop precedence level will be set to the specified value.
■
DSCP – The DSCP value will be set the specified value.
■
The following buttons are used to edit or move the QCEs:

Table 12: QCE Modification Buttons

Button Description
Inserts a new QCE before the current row.
Edits the QCE.
Moves the QCE up the list.
Moves the QCE down the list.
Deletes the QCE.
The lowest plus sign adds a new entry at the bottom of the list.
QCE Configuration
Port Members – The ports assigned to this entry.
◆
Key Parameters
Tag – VLAN tag type. (Options: Any, Tag, Untag; Default: Any)
◆
◆ VID – VLAN identifier. (Options: Any, Specific (1-4095), Range;
Default: Any)
PCP – Priority Code Point (User Priority). (Options: a specific value of
◆
0, 1, 2, 3, 4, 5, 6, 7, a range of 0-1, 2-3, 4-5, 6-7, 0-3, 4-7, or Any;
Default: 0)
DEI – Drop Eligible Indicator. (Options: 0, 1 or Any)
◆
SMAC – The OUI field of the source MAC address. Enter the first three
◆
octets (bytes) of the MAC address, or Any.
– 187 –
| Configuring the Switch
C 4
HAPTER
Quality of Service