Configuring Dscp Classification; Figure 78: Configuring Dscp Translation And Re-Mapping - SMC Networks SMCGS10C-SMART Management Manual

C DSCP
ONFIGURING
C
LASSIFICATION
W I
EB NTERFACE
To configure DSCP translation or re-mapping:
Click Configuration, QoS, DSCP Translation.
1.
Set the required ingress translation and egress re-mapping
2.
parameters.
Click Save.
3.

Figure 78: Configuring DSCP Translation and Re-mapping

. . .
Use the DSCP Classification page to map DSCP values to a QoS class and
drop precedence level.
P
ATH
Configuration, QoS, DSCP Classification
P
ARAMETERS
These parameters are displayed:
QoS class/DPL – Shows the mapping options for QoS class values and
◆
DP (drop precedence) levels.
DSCP – DSCP value. (Range: 0-63)
◆
– 185 –
| Configuring the Switch
C 4
HAPTER
Quality of Service