Service; Figure 97: Network Access Server Switch Status - SMC Networks SMCGS10C-SMART Management Manual

W
To display port status for authentication services, click Monitor, Security,
Network, NAS, Switch.

Figure 97: Network Access Server Switch Status

Use the NAS Statistics Port selection page to display authentication
D P
ISPLAYING ORT
statistics for the selected port – either for 802.1X protocol or for the
S
TATISTICS FOR
remote authentication server depending on the authentication method.
802.1X R
OR EMOTE
This page provides detailed NAS statistics for a specific switch port running
A
UTHENTICATION
EAPOL-based IEEE 802.1X authentication. For MAC-based authenticated
S
ERVICE
ports, it shows statistics only for the backend server (RADIUS
Authentication Server).
P
Monitor, Security, Network, NAS, Port
P
These parameters are displayed:
Port State
◆
◆
◆
◆
I
EB NTERFACE
ATH
ARAMETERS
Admin State – The port's current administrative state. Refer to NAS
Admin State for a description of possible values (see
Port State – The current state of the port. Refer to NAS Port State for
a description of the individual states (see
QoS Class – The QoS class assigned by the RADIUS server. The field is
blank if no QoS class is assigned.
Port VLAN ID – The VLAN in which NAS has placed this port. This field
is blank if the Port VLAN ID is not overridden by NAS.
If the VLAN ID is assigned by the RADIUS server, "(RADIUS-assigned)"
is appended to the VLAN ID. Refer to "RADIUS-Assigned VLAN Enabled"
for a description of this attribute (see
If the port is moved to the Guest VLAN, "(Guest)" is appended to the
VLAN ID. Refer to "Guest VLAN Enabled" for a description of this
attribute (see page 77).
– 211 –
| Monitoring the Switch
C 5
HAPTER
Displaying Information About Security Settings
page 77).
page 77).
page 77).